This is a question we are asked often. What is the difference between EMF shielding and EMF harmonisation?
Some people refer to anything that mitigates the EMF charge in the air as “Blocking” or “Shielding” the EMF. However, there is a big misconception of what Blocking or Shielding is about.
A product that blocks EMF is normally a shield type of material such as EMF paint, EMF shielding curtains, window protection film, or Faraday cage type products.
Shielding or blocking products are only suitable for protecting against Radio Frequency (RF) fields. However, RF even though it is read as Millivolts per cubic meter, doesn’t have enough electromagnetic charge to be able to disrupt the Chinese Meridian systems of the human body.
Shielding and blocking materials do reduce RF meter readings to what would be inaccurately perceived as a “safe” reading in a building. The problem here is that RF is harmless and the shielding is reducing something which doesn’t need mitigating!
In fact, it is not the RF that we need the protection from. It is the positive “charged” emf fields we all need protection from, which is not read with the use of an RF meter.
Charged EMF is best detected with a Biotensor which also accurately shows the size of the harmful charged EMF fields that do affect the human body, namely the disruption to the Chinese Meridians, and that is exactly why we need to protect ourselves from such energy.
An example would be with a WI-FI router. The router generates a small, charged EMF field around it up to 1 meter distance. This field disrupts the Chinese Meridians, however beyond this charged field, is an RF field which has no EMF charge. With an RF meter the perception is incorrectly interpreted that the extent of the RF field is harmful, but it is not!
There are WI-FI blocking pouches available on the market which reduce the RF readings. However, the charged EMF field which is the harmful component of radiation, still exists.
l often see marketing people selling substandard mobile phone ‘harmoniser’ products that demonstrate their supposed effectiveness when using an RF meter with a ‘before’ and ‘after’ shot. The ‘after’ image shows a low reading, however, if you look carefully the hand holding the meter is cupped behind the phone which blocks the wave, thus showing a false “safe” reading.
They also show a so-called harmoniser attached to the back of a mobile phone. When you read the energy, the phone is actually turned off which is why they are getting a near zero RF reading. We don’t test our mobile phone harmonisers with trickery like some sellers do. What they fail to do is recognize the positive charged field around a mobile phone which is the real EMF danger being emitted from mobile phones.
The way we test the effectiveness of our mobile phone harmoniser’s charged field is against the Chinese Meridian’s energy of the human body via a kinesiology audit - first with, and then without, our phone harmoniser applied. So, we are testing the persons meridian energy rather than relying on a meter to determine the energy.
Why Harmonising EMF Radiation is so important.
When it comes to harmonising, which is what our products do, we generate a negatively charged environment which balances out the positive charge, which is what makes charged EMF fields harmful.
We achieve this using counter-frequencies to the positively charged frequencies. This is measured by monitoring the Chinese Meridians of the body which, without a harmoniser, shows weak Meridian energy. This means there’s less meridian energy charge to enable our vital organs to function properly.
With the application of a harmoniser such as the Stellar Pendant®, Geoclense®, Stellar Dome®, or our Mobile Phone and Wi-Fi Harmoniser, the harmful positive charge is replaced with a healthy negatively charged environment which is in sympathy to the Meridians, so there is no deterioration of the meridian system’s energy.
EMF shielding or blocking materials do not offer any protection to the Chinese meridians.